CDT introduces their NEW 2OHM speaker Series.
IT'S THE LAW! More power from your amp!
Introducing CDT Audio’s newest systems
at 2 Ohm impedance.
WHY 2 OHMS? Ohms law proves that when you reduce your resistance (impedance) by 1/2 you can double your amplifiers output (wattage). Imagine the implications. Since most car sound systems are built around a speaker impedance of 4 ohms, a CDT 2 ohm system means you can buy a 30 watt per ch amplifier (rated at 4 Ohms) and get 60 watts per channel! Here is another way you can look at it: Say you were thinking about buying a small amp because your system needs a little more power. Instead - upgrade to a CDT 2 Ohm system. You'll double your available power, and you'll get a tremendous speaker upgrade as well. It's like 2 upgrades for the price of one! |
Super 3.2, 2 Ohm Sub-bass 3 Way
No need for a big difficult to install subwoofer any more.
CDT introduces new Super 3.2 2 Ohm Sub-bass 3-way component system. No need for a big difficult to install subwoofer any more. This system will perform deep bass down to 20Hz in optimum ported enclosure, installed in a vehicle door environment you will get deeper bass than any system you have ever heard from a small driver installation. This system woofer is designed to deliver deep bass response yet engineered to meet a mid and tweeter to perfect blend as a sweet audiophile 3-way component system.
Suitable for enclosed or free air use in your vehicle, these drivers provide full, rich, extended bass below 20Hz (ported) also simply mounted in a panel or deck with or without a sub enclosure. The air load is provided mechanically in the suspension or may be augmented with a back load by sub enclosure. If you’re listening tastes are for reasonable levels in smaller spaces these drivers provide optimum value and minimized installation cost. Why pay for performance and high installation costs if you do not need the high SPL?
Designed and built to deliver accurate and natural clean deep bass performance never heard before from a 6.5” 3-way wide range Sub-driver component set.
The Super 3.2 enhances deep bass response without the high cost, the pleasure without the pain. Can be wired 2X4 Ohm 1X2 Ohm or 1X8 Ohm. Makes this system suitable for almost any installation
Super 3.2 2 Ohm Sub-bass 3-way
System content:
- 1 pr Cast 2X4 Ohm (1X2 Ohm) 6.5” DVC subwoofers
- Frequency response 42Hz-20.000Hz
- From 20Hz in (optimum ported enclosure)
- Power handling: 200watt HPD 100Hz
- 140 watt or more clean signal full range
- Impedance 2 Ohm
- Sensitivity: 79.74dB
- Mounting depth 6.5” bass woofer: 2.75” (69.9mm)
- Diameter: 6.5” (170mm)
- Cone: Coated non woven carbon fiber cone
- Magnet weight: 24 Oz
- Cone surround: rubber Voice coil: 1.0” (26mm)
- FS: 42.39Hz
- 1 pr MX-1000 3-way 24dB crossover
- 1 pr ES-02 super wide range mid/twtr
- 1 pr ES-010.2 , 1.1” silk dome tweeter
Manufacturer: CDT Audio
MPN: Super3.2
SKU: Super3.2
ISBN: Super3.2
FREE SHIPPING:
YES
Internet Authorized:
YES
Warranty:
YES
Shipping Time:
1-2 Days
Sign In
