GMA210 Dual 10" Subwoofer Enclosure
for CHEVY Silverado and GMC Sierra CREW Cab by Q-Logic
Technical Details
- Fits ONLY 2001-2007 CREW Cab 2500/3500 Chevy Silverado and GMC Sierra
- Mounts under rear seat. 1.1 Cu ft. Type 1 sealed enclosure
- Mounting Depth: 4" Magnet diameter = 4.375" depth. 6" Magnet diameter = 4" depth
- Avail in GRAY carpet only
- Includes terminal cup, screws, wire for inside box, polyfill and instructions
GMA210 Dual 10" Subwoofer Enclosure
for CHEVY Silverado and GMC Sierra CREW Cab by Q-Logic
Fits ONLY 2001-2007 CREW Cab 2500/3500 Chevy Silverado and GMC Sierra Mounts under rear seat. 1.1 Cu ft. Type 1 sealed enclosure Mounting Depth: 4" Magnet diameter = 4.375" depth. 6" Magnet diameter = 4" depth Avail in GRAY carpet only Includes terminal cup, screws, wire for inside box, polyfill and instructions
Product Description
Designed specifically for the 2001 - 2007 Chevy Silverado and GMC Sierra CrewCab, the QLF-GMA210 is a dual 10" sealed enclosure. The design allows mounting under the rear seats without making any permanent alterations to the vehicle. The enclosure utilizes boundary loading by firing the woofers into the floorboard. Boundary loading increases the output and extends the lowest frequencies which greatly enhance the performance of your subwoofers. Through careful testing, we determine the exact height necessary to lift the enclosure off the floor to achieve the maximum results. MDF construction and sturdy mounting platforms combine to give you a rock-solid enclosure. The center transmission hump is even incorporated into the design providing another "boundary" location as well as reinforcement of the enclosure itself. Careful enclosure design and precise manufacturing allow for maximum mounting depth in a very tight location. The enclosure wraps itself around the factory seat hinges utilizing every bit of available air space without compromising passenger room or comfort. Installation is easy. This enclosure requires relocating the factory jack which is installed under the passenger side rear seat. The jack mounting bracket is bolted onto the floor board so removal and relocation are within everyone's skill level. Once the jack is removed, install your woofers using the specially designed MDF screws provided with your enclosure, run speaker leads from your amplifier to the terminal cups, slide the custom-fit enclosure under the seats and you are done. Q Logic makes adding bass easy.
Includes:Terminal cups Speaker wire Subwoofer mounting screws (specifically designed for MDF) PolyFil (Polyester Fiber Fill) Step by step instructions
Manufacturer: Q-Research LLC
MPN: QLF-GMA210
SKU: QLF-GMA210
ISBN: QLF-GMA210
UPC: 22458100125
FREE SHIPPING:
YES
Internet Authorized:
YES
Warranty:
YES
Shipping Time:
1-2 DAYS
Sign In
