10" KICKER 07CVR10-4 COMP VR Subwoofer 800 Watts 4 Ohms
".........the tough get going." Kicker has gone way out with the CompVR round subwoofers to endure the the harsh demands of producing big bass. Every sub holdss an injected-molded polypropylene cone and Santoprene™ rubber surround in a high-strength steel basket with roomy interior venting. Kicker's SoloKon™ cone design looks marvelous while it protects against flexing that can damage your sub and spoil your sound.
The 07CVR104 10" sub features dual 4-ohm voice coils that can deal with a heavy power onslaught, while allowing more options for hooking up your system. UniPlate construction molds parts of the sub's motor structure together as a single unit to maximizing heat transfer, improved accuracy, and extended cone excursion.
Kicker CompVR subs can even be used for marine applications.
10" KICKER 07CVR10-4 COMP VR Subwoofer 800 Watts 4 Ohms
Details:
- 10" subwoofer with dual 4-ohm voice coils
- Injection-molded polypropylene cone
- Ribbed Santoprene rubber surround
- Suitable for marine use
- Power handling: 50-400 watts RMS (200 watts per coil)
- 800 watts peak power handling
- Frequency response: 25-500 Hz
- Sensitivity: 85.5 dB
- Top-mount depth: 5-9/16"
- Sealed box volume: 0.8-3.0 cu. ft.
- Ported box volume: 1.25-1.75 cu. ft.
Features
Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.
Cone Materials: The cone was developed using Kicker's SoloKon technology. The ultra high performance injection molded polypropylene cone remains rigid and minimizes cone flex, lowering harmonic distortion. Distortion in the cone is further reduced with new back bracing.
Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
Enhanced BAM (Basket And Motor) Assembly: The high-strength steel basket features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.
UniPlate Construction: The woofer features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:
- Optimizes heat transfer efficiency for cooler operation and maximum power handling ability
- Eliminates erratic magnetic flux from the voice coil gap
- Releases pressure under the suspension for uniform cone movement and responsive low bass
- Prevents the voice coil from bottoming out and corresponding damage
Tinsel Leads: The woofer features sleeved high-power tinsel lead wires to resist breakage and power-robbing resistance losses. The lead wires are terminated with polymer-based strain relieving mechanical fasteners.
Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.
Break-in Period: Due to the complex nature of Kicker Comp VR speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.
Marine Ready: This woofer is made with a powder coated, weather resistant basket and stainless steel hardware, so it can be used in marine and mobile applications.
Enclosure Compatibility
Power Handling: The power handling specifications differ according to the type and size of the enclosure. The power handling specifications assume that both voice coils are in use. Note: Both voice coils in a dual voice coil speaker should always be connected.
Recommended Sealed Box Volume:
- Compact (minimum enclosure volume): 0.8 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
- SQ (maximum enclosure volume): 3 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
Recommended Vented Box Volume:
- Compact: 1.25 cu/ft; 2" x 10.5" port opening; 20" port depth; the woofer can handle up to 200 watts RMS (100 watts per voice coil)
- SPL/Deep Bass: 1.75 cu/ft; 2.5" x 10.5" port opening; 20" port depth; the woofer can handle up to 200 watts RMS (100 watts per voice coil)
Note: The power handling specifications listed with the vented enclosure recommendations apply only when a 25Hz, 24dB/octave subsonic filter (sold separately) is used with this woofer. If a subsonic filter is not used, power handling may decrease, excessive port noise can occur, and the life of the woofer may be shortened.
<meta name="google-site-verification" content="ndpieL-SHdt60yKiNt5rDLD39rerCvx4Z3lCsMT5L-0" />
