556UW-i Universal Transponder Bypass INSTALLATION INCLUDED

556UW-i  Universal Transponder Bypass INSTALLATION INCLUDED

IMPORTANT NOTE:  It is almost certain you will need to surrender one of your "chipped" keys to complete your remote start installation using this module.  Consequently, you will need to provide TWO (2) chipped keys at the time of installation - One to be incorporated with this device, and the other for running your car.  If you don't have a second chipped key besides the one with which you drive your car, you will need to obtain one prior to installation of your remote start unit.  Therefore, you might want to check the application guide to see if there is an "XK" model avail for your vehicle.  Although the XK units cost about $20 more, duplicating chipped keys usually runs between $70 & $100

One Box Fits All

Universal Transponder Bypass  

Overview: The 556UW immobilizer interface module is used when installing remote start products (sold separately) in select vehicles equipped with an RF (Radio Frequency) based immobilizer system. This type of system uses a small chip imbedded in the ignition key, called a transponder, to transmit a very low powered RF signal. This signal is picked up through an antenna (or coil) around the ignition switch which is then sent to the immobilizer's transceiver. Once the correct signal is received, the immobilizer will enable the ignition and/or fuel systems. If an attempt is made to start the vehicle and the transceiver does not receive a valid code, the ignition and sometimes the fuel systems are disabled. The immobilizer system will then render the remote start useless. The 556U bypasses the immobilizer system only while the remote start is in use, maintaining the factory system's integrity. When the remote start system is not in use the factory immobilizer remains fully functional

Don't Know Which XpressKit You Need? 
Application Guide


"INSTALLATION INCLUDED" DETAILS: Installation Included applies only when we are installating a new VIPER remote start purchased from us at the same time.  We will perform a standard installation on this unit at no extra charge.   We are authorized VIPER dealers.  You will receive a quality unit and a professional installation.  Please note the following terms of sale which supersede and override the general terms of sale posted on this web site: This unit must be installed by an authorized dealer, or there is no warranty.  You must present your vehicle at our facility at 120 N Main St, Forked River NJ 08731 for installation.Within 10 days of purchasing this item from us you must schedule an appointment allowing for completion of the installation of this item within 60 days of it's purchase.  Failure to make an appointment within the prescribed time, or failure to keep such an appointment shall constitute your foreiture of your free installation.  A missed appointment or an appointment cancelled less than 48 hours in advance may be rescheduled for a $25 fee.  This is a final sale, and there are no returns, so you may not cancel the transaction for a refund if your fail to make or keep an appointment.  Options and functions not explicitly described as being included in this system within this advertisement are not included, but may be available for an additional fee.

Allows remote start in vehicles equipped with a transponder or radio-frequency based immobilizer

556UW-i  Universal Transponder Bypass INSTALLATION INCLUDED

Bypass Essentials modules work with your vehicle's anti-theft system to incorporate the convenience, security and luxury features of your alarm system.

Universal bypass modules work with any vehicle using an "immobilizer" key system, allowing you to remote start your car without disrupting factory-installed anti-theft features.

Use the 556U universal bypass in vehicles equipped with a transponder or RF-based immobilizer, such as those found in many late-model GM vehicles. The compact module is tunable for European or domestic vehicles and features tamper-resistant circuitry.

Important Note: One of your car's transponder keys will be permanently installed in the 556U module. You can buy an extra key through your dealer and have it programmed to work with your car's immobilizer. Ask your dealer if keys can be programmed individually — some vehicle manufacturers require that all keys be reprogrammed at one time.

Details:

• Universal bypass for Python alarm systems
• Compatible with any factory RF immobilizer or transponder system, including GM Passkey3
• Temporarily overrides the factory immobilizer
• Maintains integrity of factory anti-theft system
• Kit can be tuned for use with European or domestic vehicles
• Supplied harnesses splice into factory wiring
• Requires permanent key mount (into compact module)

 


Don't Know Which XpressKit You Need?
Application Guide