CDT Audio HD-62CF 6.5" Carbon Fiber Component Set
SPECIAL - Limite Time
Not only are these tremendous speakers on sale, but you will receive a 2nd set of tweeters - the Brand New WS-100i "Imaging" Tweeters, ABSOLUTELY FREE!
Use link below to see details of the WS-100i
ALL NEW - EU Standard Size 6.5" Cast Frame Carbon Fiber Cone
NEW HD-6CF EU Size 6.5 Woofer
NEW EX-484 Crossover
NEW HD-100 1.1" Silk Tweeter
CDT Audio HD-62CF 6.5" Carbon Fiber Component Set
SPECIAL - Limited Time
Not only are these tremendous speakers on sale, but you will receive a 2nd set of tweeters - the Brand New WS-100i "Imaging" Tweeters, ABSOLUTELY FREE!
Use link below to see details of the WS-100i
-
EU 6.5" Norm
-
6.5" 2-Way Component Set
-
6.5" Cast Alloy Woofer Frame
-
Depth: 2 3/4"
-
Woofer Cone: Carbon Fiber
-
Crossover: EX-484 24 dB Elliptic
-
Tweeter: HD-100 1.1" Silk Dome
-
Power Handling: 170 Watts RMS @ 100 Hz High Pass
-
Frequency Response: 65 Hz 20,000 Hz
-
Sensitivity: 91.2 dB
-
Impedance: 4 Ohm
-
Surface and Flush Tweeter Mounts
CDTAUDIO designs and builds its drivers and crossovers to the very highest of standards. Years of experience and design flexibility yield higher quality and better performance. Quite simply, we produce "audiophile" sound, smoother response, wider dynamic range, and better imaging and higher reliability. Our incredible midbass and midrange drivers are flat to 7khz! That's 6.5-octave response!
This puts much less stress on the Tweeter, providing greater power handling and much better sound. Our special "Contoured Dispersion" radiation pattern in the critical midrange frequencies delivers rock solid imaging and front staging, with virtually no "side biasing."
The carbon treated paper cones offer ideal stiffness and damping. The curvilinear cone shape prevents cone flex and break up. This provides clean midbass even at higher levels. The always-critical midrange frequencies are clear and precise with no distortion from "ringing." The midbass/midrange drivers use real butyl surrounds, not merely a mixed butyl compound. This provides longer, more linear excursion, and a far longer life because it's UV resistant.
AudioPhile Tweeters
Engineering a perfect compliment to the highly acclaimed CDT drivers was an equally challenging task. "The Elliptic" crossovers, called SatNet, are an engineering breakthrough for car audio.
They use an ingeniously designed fifth order, elliptic type network that creates very distinct advantages over conventional "Butterworth" or "Linkwitz-Riley" passive filter topologies. This topology is so unique that this is the VERY FIRST TIME it has been used commercially in a car audio application.
Technically speaking, the SatNet crossover design is a fourth order/24dB per octave design supplemented by a series first order/6dB per octave on the front end. The unique combination of the two creates a virtual 10th order, 60dB per octave crossover where the critical crossover point between the mid and Tweeter is.
The benefits of the design are many. First, the power transition between midrange and Tweeter is virtually identical. Phase response problems and polarity shifts are almost entirely eliminated. What you HEAR, is a much more natural sounding component system, as if it were that one perfect speaker.
All combined, you have the ideal link to some of the best car audio loudspeakers you'll ever listen to.
<meta name="google-site-verification" content="ndpieL-SHdt60yKiNt5rDLD39rerCvx4Z3lCsMT5L-0" />
1.1" Soft Dome Tweeter Ferro fluid cooling 