StreetWires Power Station 4 ga Amplifier Installation Kit
Features
General Overview: This is a single amplifier wiring kit that includes the power and ground cables, interconnect cable with integrated turn-on lead, and accessories required to install one amplifier. Speaker wire is sold separately.
In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 100-amp AFS fuse. The fuse holder's set screw input and output accept bare 4-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder has the following dimensions: L=3.335", W=1.887" (including integrated mounting tabs), H=0.994".
Note: The set screws require 3mm and 5/32" Allen wrenches.
Power and Ground Cables: The 4-gauge power cable has a translucent blue insulation jacket while the 4-gauge ground cable has a clear insulation jacket.
Interconnect Cable: The interconnect cable has a clear insulation jacket. An 18-gauge wire is attached to the interconnect cable for use as a remote turn-on lead, so you don't have to run an extra wire.
Crimp-on Terminal Dimensions: The crimp-on terminals have the following dimensions:
- Power Ring Terminal (installed): W=0.655", Inner Diameter=0.335"
- Ground Ring Terminal (installed): W=0.655", Inner Diameter=0.199"
- 4-gauge Spade Terminals: W=0.515", Prong Spacing=0.253"
- 18-gauge Spade Terminal: W=0.275", Prong Spacing=0.147"
Sign In
